ICP-6800S

ICP-6800S is a full-spectrum direct-reading inductively coupled plasma emission
spectrometer for the determination of trace and trace elements in different substances (dissolved in nitric acid, hydrochloric acid, hydrofluoric acid, etc.).

Performance characteristics

RF Power technical parameter

Circuit type: solid-state RF power supply, with function of automatch

Frequency: 27.12MHz±0.05％

Frequency Stability: ＜0.1%

Power Output: 500—1600W

Power Output Stability: ＜0.3%

Escaped RF radiation: 30cm away from the instrument, electric field: E﹤2V/m

Sampling System Technical Parameter

Output working coil inner diameter ：25mm

Torque tube: Three concentric, external diameter 20mm

Coaxial nebulizer:Outer diameter 6mm

Double barrel atomizing chamber: Outer diameter 34mm

Gas Flow Controls

Plasma Argon Flowmeter:（100-1000）L/h (1.6-16L/min)

Auxiliary Argon Flowmeter:（10-100）L/h (0.16-1.66L/min)

Carrier Argon Flowmeter（10-100）L/h (0.16-1.66L/min)

Pressure Maintaining Valve（0-0.4MPa）

Cooling Water：Temperature: 20-25℃, Rate of Flow>5L/min, Hydraulic Pressure>0.1MPa

Spectrometer

Optics：Czerny-Turner type

Focal length: 1000 mm

Grating: Ion Beam Etching Holographic Grating, 3600L/mm or 2400L/mm

Reciprocal linear dispersion: 0.26nm/mm

Resolution:≤ 0.007nm (3600 line grating)；≤0.015nm (2400line grating)

Wavelength range: 3600 line grating:(190nm～500) nm；2400 line grating: (190nm～800) nm

Minimum pace of stepping motor: ≤0.0006 nm

Exit Slit:12μm;Entrance Slit:10μm

Photoelectric Converter Performance

Photomultiplier tube specification: R293/R928

Negative HV on PMT: 0-1000V;Stability: ＜0.05%

Detection Limits (μg/L)

Element	WL(nm)	Limit	Element	WL(nm)	Limit
La	408.672	<3.0	Cr	267.716	<5.0
Ce	413.765	<5.0	Al	396.152	<5.0
Pr	414.311	<5.0	Zr	343.823	<5.0
Nd	401.225	<5.0	Ag	328.068	<3.0
Sm	360.946	<10.0	Sr	407.771	<1.0
Eu	381.967	<1.0	Au	242.795	<5.0
Gd	342.247	<10.0	Pt	265.945	<5.0
Tb	350.917	<3.0	Pd	340.458	<5.0
Dy	353.170	<3.0	Ir	224.268	<10.0
Ho	345.600	<3.0	Rh	343.489	<10.0
Er	337.271	<3.0	Ru	240.272	<5.0
Tm	313.126	<3.0	Ba	455.403	<1.0
Yb	369.419	<1.0	As	228.812	≤15
Lu	261.541	<3.0	Sb	206.833	≤15
Y	371.030	<1.0	Bi	223.061	≤10
Sc	335.373	<1.0	Hg	253.652	≤15
Ta	226.230	<5.0	Pb	220.353	≤15
Nb	313.340	<5.0	Ga	294.364	≤10
Mn	257.610	<3.0	Se	203.985	≤10
Mg	279.553	<1.0	Sn	242.949	≤20
B	249.773	<10.0	Te	214.281	≤10
Zn	213.856	<3.0	Ta	226.230	≤5.0
Co	228.616	<3.0	Th	283.730	≤10
Si	251.611	<10.0	Tl	276.787	≤30
Ni	232.003	<5.0	Re	227.525	≤5
Cd	226.502	<3.0	Ge	209.426	≤15
Fe	239.562	<3.0	Os	225.585	≤1
Ca	393.366	<1.0	W	207.911	≤10
Mo	281.615	<5.0	Cu	324.754	<3.0
V	310.230	<5.0	Li	670.784	≤3
Be	313.041	<1.0	Na	588.995	≤20
Ti	334.941	<3.0	K	766.490	≤60

Certifications

Product Qualification: European safety qualification mark CE, North American safety certification ETL, Federal Communications Commission FCC, European electrical safety certification RoHS, China Quality Certification Center CQC, China national mandatory product certification 3C

Packaging & Shipping

After carefully unpacking the contents, check the materials with the packing list (page 4) to ensure that you have received everything in good condition.

Place the instrument in a suitable location away from direct sunlight. In order to have the best performance from your instrument, keep it as far as possible from any strong magnetic or electrical fields or any electrical device that may generate high-frequency fields. Set the unit up in an area that is free of dust, corrosive gases and strong vibrations.

Remove any obstructions or materials that could hinder the flow of air under and around the instrument.

Use the appropriate power cord and plug into a grounded outlet.

Turn on your spectrophotometer. Allow it to warm up for 15 minutes before taking any readings. We suggest you then do the Calibrate System with the Search 656.1nm to set the wavelength to the deuterium lamp emission line.

Exhibition

FAQ

Q: How to pick up the best among these models?

A:Tell us your request on product and almost target price,we recommend you the most suitable model. Selling you the most expensive product is not our goal,selling you the most suitable is!

Q: How to place order or pay?

A:You can place order to us directly,we offer you PI (contract) with bank information, you pay here,we ship the product,Every process is based on PI.

Q: How to transport the product?

A:Depending on the quantity and what kind of machine you order or whether you are urgent or not to check how big it is to check the freight.
By sea: More than 60kg or big quantity;Safe,cheap but slow;
Usually 11-30 days to North America;
30-45 days to Middle of South America;
40-60 days to South America;
15-28 days to South Africa;
25-33 days to Europe;
30-45 days to East Europe;
35-45 days to North Europe;
28-35 days to Mediterranean countries;
28-40 days to Middle East countries;
7-20 days to Southeast Asia countries;
By air to airport: Suit for big product or quantity but urgent a lot. Usually 7-10 days arrive. Some direct flight can arrive at 3-5 days.
By Express delivery such as DHL,FedEx,TNT: Suit for small or not too heavy and very urgent product. Generally 5-7 days arrive.

Q: What kind of warranty will be offer?

A:Most of our product we offer 1 years warranty,except perishable part. During the warranty time,any problem,we offer after-sale service; Welcome our customer talk this with our sales directly,they will offer you more details;

Q: How’s our service?

A: Before place order,any inquiry we make sure will reply in 1 day,and offer you our suitable advice based on our professional product knowledge;
After place order,we will help you follow the shipping information until you get these machines;
If any problems on delivery or using,we make sure you can contact us in 1 day.